Rocken Tech Advanced Models For Fuel Injection Pump Testing
Rocken Tech test benches are available in 7.5kW (10hp), 11kW (15hp) and
15kW (20hp), 18.5kW (25ph), 22kW (30hp) and 37kW (50hp). They have
been recognized in compliance with the ISO 4008, ISO9001 and 2000
regulations for testing and calibrating in line and rotary diesel fuel injection
pumps.
The test benches can perform testing for pumps such as BOSCH in line
type K, M, MW, A, B, BV, P(ZU,ZW,ZM), and BOSCH rotary distributor
injection pumps EP/VA, EP/VM, VE,…F…, other pump types include I, II, III,
K, P7, BQ, etc. To accommodate the new technologies in the industry, all
existing and new Rocken Tech test benches now are capable of testing EUI
and common rail systems. However a separated (or independent) test kit
with cam box is required to perform the test. Also the test benches are
future bio-diesel user friendly for any pumps that suitable for the fuels.
Rocken Tech test benches are available in 7.5kW (10hp), 11kW (15hp) and
15kW (20hp), 18.5kW (25ph), 22kW (30hp) and 37kW (50hp). They have
been recognized in compliance with the ISO 4008, ISO9001 and 2000
regulations for testing and calibrating in line and rotary diesel fuel injection
pumps.
The test benches can perform testing for pumps such as BOSCH in line
type K, M, MW, A, B, BV, P(ZU,ZW,ZM), and BOSCH rotary distributor
injection pumps EP/VA, EP/VM, VE,…F…, other pump types include I, II, III,
K, P7, BQ, etc. To accommodate the new technologies in the industry, all
existing and new Rocken Tech test benches now are capable of testing EUI
and common rail systems. However a separated (or independent) test kit
with cam box is required to perform the test. Also the test benches are
future bio-diesel user friendly for any pumps that suitable for the fuels.
 | |  | |  |
Advanced Injection Pump Test Bench
Major Features:
- Automatic measuring and digital control of spray volume and times
with accuracy 0.02ml
- Computer display of fuel quantity collection for 12 elements - Optional
- Check each line’s injection timing and starting point of injection
- Drive Speed control from 0-9999 rpm with preset selections
- Display and control fuel temperature and pressure 40°C ±1°
- Display lube oil pressure
- Checking advanced angle – accuracy 0.1°
- Control rack travel 50 mm, accuracy 0.01mm with curved diagram display
- Checking air pressure
- Display dynamic phasing angle and emergency shut off of every cylinder
- Automatic recording and printing data and curves of pump for post\
process evaluations
- Optional needle lift equipment
- DC supply output: 12V and 24V
- Computer data recording, network searching, and printing
- Automatic measuring and digital control of spray volume and times
with accuracy 0.02ml
- Computer display of fuel quantity collection for 12 elements - Optional
- Check each line’s injection timing and starting point of injection
- Drive Speed control from 0-9999 rpm with preset selections
- Display and control fuel temperature and pressure 40°C ±1°
- Display lube oil pressure
- Checking advanced angle – accuracy 0.1°
- Control rack travel 50 mm, accuracy 0.01mm with curved diagram display
- Checking air pressure
- Display dynamic phasing angle and emergency shut off of every cylinder
- Automatic recording and printing data and curves of pump for post\
process evaluations
- Optional needle lift equipment
- DC supply output: 12V and 24V
- Computer data recording, network searching, and printing
Model RTEFC6 & RTEFC12 are add-on kits with
computerized fuel measuring system with
separated graphic display for 6 and 12 injectors. Th
kit is to replace the traditional glass graduate tubes
and can be attached to any models of Rocken Tech
test stands. The advanced models equip with either
one of these units.
computerized fuel measuring system with
separated graphic display for 6 and 12 injectors. Th
kit is to replace the traditional glass graduate tubes
and can be attached to any models of Rocken Tech
test stands. The advanced models equip with either
one of these units.
